Datamatrix — continued
Datamatrix Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Scan the END bar code.
START / END
0103(CR)
DEFAULT SETTING FOR THIS FEATURE: 001
Set Length 2
Product Reference Guide
and scan the three digits (zero-padded) representing the length.
Alphanumeric Pad
For Datamatrix bar codes, only the data characters are included in the
length calculations.
Any value set higher than 800 will be considered to be 800.
NOTE
PROGRAMMING BAR CODES
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 800
2D Symbologies
0104(CR)
137