Transmit Function Characters - Datalogic Magellan 800i Reference Manual

Symbologies
Code 128 — continued

Transmit Function Characters

Enables/disables transmission of Code128 function characters 1, 2, 3, and 4.
Function codes are transmitted as follows:
•
•
•
•
NOTE
START / END
02C700(CR)
Transmit Function Characters
96
FNC1 = 80 hex
FNC2 = 81 hex
FNC3 = 82 hex
FNC4 = 83 hex
If the label starts with a function 3 character, it is con-
sidered a programming label and no modificatoins are
made to the label data. Other than that, if this configu-
ration item is set to disable, then all function characters
are stripped from the label data.
Disabled is the recommended setting for all interfaces.
PROGRAMMING BAR CODES
Don't Transmit Function Characters
DEFAULT
02C701(CR)
Magellan TM 800i