Image Compression - Datalogic Magellan 800i Product Reference Manual

Enter/Exit Programming Mode

Image Compression

Specifies the starting image compression factor for JPEG images. A higher num-
ber specifies a higher quality image with less compression than a relative lower
number for the same image.
A value of 100 means minimal compression. A value of 1 means maximum
compression at a loss of quality. Follow these steps to program this feature:
1. Scan the START bar code.
2. Scan the Set Image Compression bar code.
3. Turn to
4. Scan the END bar code.
03ED1E(CR)
Image Compression = 50
(medium compression — medium quality)
03ED64(CR)
22
Alphanumeric Pad
senting the desired compression. The configurable range is 01-0x64 by
increments of 01.
and scan the two digits (zero-padded) repre-
Image Compression = 30
(higher compression — lower quality)
03ED32(CR)
Image Compression = 100
(minimal compression — higher quality)
DEFAULT
Image Capture
Magellan™ 800i Scanner