Image Compression
Specifies the starting image compression factor for JPEG images. A higher num-
ber specifies a higher quality image with less compression than a relative lower
number for the same image.
A value of 100 means minimal compression. A value of 1 means maximum
compression at a loss of quality. Follow these steps to program this feature:
1. Scan the START barcode.
2. Scan the Set Image Compression barcode.
3. Turn to and scan the two digits (zero-padded) representing the desired
compression. The configurable range is 01-0x64 by increments of 01.
4. Scan the END barcode.
START / END
Image Size
Specifies the size of the image capture. Choices are:
•
WVGA
•
VGA
START / END
Image Size = VGA
24
PROGRAMMING BARCODES
100 (minimal compression — higher quality)
PROGRAMMING BARCODES
Set Image Compression
DEFAULT SETTING IS
Image Size = WVGA
DEFAULT
Magellan™ 1100i Scanner