Error Codes - Datalogic Magellan 800i Reference Manual

Error Codes

Upon startup, if the scanner flashes its indicator LED or sounds an unexpected series of beep
tones (other than normal power-up indications), this means the scanner has not passed its auto-
matic Selftest and has entered FRU
pulled, the sequence will be repeated. The following table describes the LED flashes/beep codes
associated with an error found.
NUMBER OF
LED FLASHES/
BEEPS
1
2
6
12
13
1. Field Replaceable Unit (FRU)
Product Reference Guide
1
ERROR
Configuration
Interface
System Controller
Imager System
Software ID
Failure
isolation mode. If the scanner is reset or the trigger is
CORRECTIVE ACTION
Contact Helpdesk for assistance
Error Codes
5