Beep On Ascii Bel; Beep On Not On File - Datalogic Magellan 800i Reference Manual

Interface Related Features
RS-232 Interface Features — cont.

Beep on ASCII BEL

Enables/disables ability of scanner to beep (sound a good read tone) on receiving an ASCII BEL
(07 hex).
START / END
069D00(CR)
Enable Beep on ASCII BEL

Beep on Not on File

Enables the scanner to cause beep to be sounded on receiving not-on-file (NOF) command.
START / END
045100(CR)
Beep on Not On File = Low Volume
DEFAULT
045102(CR)
Beep on Not On File = High Volume
34
PROGRAMMING BAR CODES
PROGRAMMING BAR CODES
Disable Beep on ASCII BEL
DEFAULT
Beep on Not On File = Disable
Beep on Not On File = Medium Volume
069D01(CR)
045101(CR)
045103(CR)
Magellan TM 800i