Stopping And Disabling Screen Savers - Polycom WX 1500 User Manual

Polycom VVX 1500 Business Media Phone User Guide

In the Folder field, enter the name of the folder in which you placed your images on the USB
flash drive.
If you didn't place the pictures in a folder (that is, you placed your pictures in the root directory),
don't enter a folder name.

Tap the Time Per Image field, and then enter the number of seconds you want each picture to
display.
You can enter a minimum of 3 seconds and a maximum of 300 seconds. The default is 5 seconds.
5 Tap the Save soft key.
If the message "No pictures found" displays after you tap the Save soft key, there are no pictures in
the folder you specified, or in the root directory (if you did not enter a folder name). Go back and
make sure the information you entered is correct.
6 Tap
7 From the idle screen, tap
8 From the Screen Saver screen, do the following:
Tap the Screen Saver field's highlighted box. From the drop-down list, tap Enabled to enable a

screen saver.

Tap the Wait Time field, and then enter the number of minutes the phone should wait after no
activity before displaying the screen saver.
You can enter a minimum of 1 minute and a maximum of 9999 minutes. The default is 15 minutes.
9 Tap the Save soft key.
10 Tap
After the number of minutes you specified in the Wait Time field, your phone will display the screen saver.
You can stop the screen saver at any time by tapping the touch screen (but the screen saver will re-start
if your phone is idle again).

Stopping and Disabling Screen Savers

You can stop a screen saver at any time, and display the idle screen, by tapping the touch screen. After
your phone is idle for the specified period of time, the screen saver will start again.
You can disable a screen saver (that is, prevent it from starting, even if your phone has been idle for the
specified period of time) by doing the following:
 Removing the USB flash drive.
The screen saver will not display until you attach the USB flash drive again (and your phone has
been idle for the period of time you specified).
 Disabling the Screen Saver setting. When you disable the setting, the screen saver will not display,
even though the USB flash drive is still attached.
To disable the Screen Saver setting:
1 Tap
> Settings > Basic > Preferences > Screen Saver.
Polycom, Inc.
to return to the idle screen.
> Settings > Basic > Preferences > Screen Saver.
to return to the idle screen.
Version 5.0.0
125