Compass Related; Compass Value Is Not Accurate - C-COM Satellite iNetVu Service Manual

iNetVu™ Service Manual

3.2.5. Compass Related

3.2.5.1. Compass value is not accurate

Cause 1:
A foreign object (e.g. metal, magnet) is radiating a magnetic field that is
obscuring the compass from obtaining a reliable reading.
8. If your compass fails accuracy, compass may require re-calibration after finding
satellite.
Solution:
Ensure that the front of the iNetVu™ Mobile Platform's front (end with Azimuth
plate) is facing North.
Solution 1:
1. Ensure there are no foreign objects (e.g. metal,
magnet) around the Mobile Platform.
2. Switch to CONFIG mode. (5000/9000 Only)
3. Go to Maintenance.
4. Click Check CP.
5. The Mobile Platform will now orient itself to North,
East, South, and West.
6. Pay attention to the Compass Heading in the
Parameters display as well as the Message Panel,
and record the values.
7. If you receive a pass compassed, you may
continue operating normally.
Page 35 of 109