Cleaning Inetvu™ Mobile Platform Connectors - C-COM Satellite iNetVu Service Manual

iNetVu™ Service Manual
2.2.3. Cleaning iNetVu™ Mobile Platform Connectors
Required Materials:
 None
Procedure:
1. Locate the iNetVu™ Mobile Platform's Connector Plate on side the
unit's base plate.
Fig. 1:
2. Remove any obstructions such as snow, ice, or dirt from the exterior
and interior (if any) or the Motor Control, Sensor, and Coaxial Ports.
Use a can of compressed air if necessary.
iNetVu™ Mobile Platform Connector Plate Location
Fig. 2: Connectors and Connector Plate
Page 11 of 109