User Manual for the Thermographic System VarioCAM
10. Operating Software IRBIS® remote 3.0*
10
Operating Software IRBIS
®
The IRBIS
remote software enables remote control of the VarioCAM
(based on the image displayed) via or onto a notebook/PC.
10.1 Programme Start
Fig. 159
Symbol of linking with a desktop
®
IRBIS
remote can be started either via the created desktop link or the programme link of the start menu.
®
Fig. 160
IRBIS
remote FireWire connection as it appears on the screen
Please note that the data transfer rate of the programme is limited to max. 25 Hz. However, the frequency
that can be displayed is dependent on the processor capacity and the graphic card of the computer involved.
User Manual
®
high resolution
®
remote 3.0
© InfraTec GmbH 2013
*
®
hr as well as image transfer
75