InfraTec VarioCAM User Manual page 67

User Manual for the Thermographic System VarioCAM
8. Operation
Fig. 136 Display of GPS=Active
In case of declining reception or a total disconnection, the start-up process ("GPS=Init") will be started
over.
A connection error between GPS module and camera (i.e. after replugging the module) will be indicated
by "GPS=NV" (not valid):
Fig. 138 Display of GPS=NV
Fig. 139 Dialogue "Accumulator state"
Via menu item "Battery..", the state of the accumulator can be checked. It shows the current voltage of
the accumulator and the shutter temperature in a message box (see Fig. 139).
User Manual
® high resolution
Fig. 137 Display of GPS=active
© InfraTec GmbH 2013 63