InfraTec VarioCAM User Manual page 69

User Manual for the Thermographic System VarioCAM
8. Operation
Menu item "Config"
Fig. 142 Menu "Settings" - "Config"
The menu item "Config" allows loading and saving the configuration of the thermographic camera, to
make standard settings and firmware updates.
Fig. 143 Dialogue "Load configuration"
Menu item "Load.." permits to load a configuration
(0 ... 5/9*).
The number of configurations that can be saved is dependent on the version of equipment. Configuration
0 contains the default setting and cannot be overwritten.
Please note that loading the default setting will reverse all previously saved individual settings. The default
settings define English to be the system language.
Fig. 145 Dialogue "Start behaviour"
By selecting the menu item "Start..", a dialogue will be shown (see Fig. 145) in which the start behaviour
of the thermographic camera can be determined:
■ "Autofocus"
User Manual
®
VarioCAM hr performs autofocus.
© InfraTec GmbH 2013
® high resolution
Fig. 144 Dialogue "Save configuration"
Menu item "Save" serves to save the current
configuration (1 ... 5/9*).
65