6
Quick Start
The following instructions shall help to quickly familiarise with operating the VarioCAM
professional results, we recommend to carefully read the entire manual.
LED
Fig. 3
Description of controls
All buttons have multiple features which are enabled by pressing briefly or for a longer (L) time. The currently
available buttons and their functions are displayed at the top of the display or in the viewfinder, respectively,
in a help line.
6.1
Preparation
You require the following equipment:
®
■
VarioCAM
high resolution
■
Li-ion battery
or
Power supply unit* with LEMO plug
®
■
IRBIS
software
6.2
Start
■
Connect to power supply by inserting the charged Li-ion battery or by connecting the external power
supply unit* to the VarioCAM
upwards).
■
Remove cover from SD card slot, insert SD card into card slot and return cover.
■
Remove lens protective cover.
■
Press button
CL
until the Operating LED flashes yellow. During the power-ON process, the blue
JENOPTIK logo is visible on the display*/in the viewfinder for approx. 40 seconds. After system
12
User Manual for the Thermographic System VarioCAM
■
SD card reader
■
SD card
®
hr (14- pin plug into left socket, with the red indication showing
© InfraTec GmbH 2013
A
button (Automatic)
T
button (Temperature spot measurement)
S
button (Stop / Store)
Multifunctional joystick ,
with Enter function (press joystick)
C
button (Esc/Colour), ON/OFF
®
high resolution
6. Quick Start
®
hr. For obtaining
,,
(Product similar to diaplyed)
User Manual