Advice On Device Safety - InfraTec VarioCAM User Manual

User Manual for the Thermographic System VarioCAM

2. Advice on Device Safety

2 Advice on Device Safety
General
®
The VarioCAM hr is a high-quality, thoroughly calibrated optical measuring instrument. Handle it with
appropriate care. Avoid soiling it, particularly its optical surfaces.
The device has protection class IP 54.
Please observe the conditions specified under Technical Data (see Chapter 3.3, Technical Data, page 9)
for use, save and transport of the device.
For transporting the VarioCAM
Opening the camera case is reserved for customer service or authorised staff only. Any interference by
the user or unauthorised persons is not permitted and will void any warranty.
Only use accessories or spare parts which are expressly recommended by JENOPTIK Laser, Optik,
Systeme GmbH for use with the VarioCAM
shall be excluded for such damage.
Standards, Guidelines
®
The VarioCAM hr complies with the requirements of the following standards:
■ EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and
■ EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use – EMC
User Manual
®
hr, exclusively use the transportation case included.
®
hr. Otherwise malfunctions or damage can occur. Warranty
laboratory use – Part1: General requirements (IEC 61010-1:2011)
Requirements – Part1: General requirements (IEC 61326-1:2005)
© InfraTec GmbH 2013
® high resolution
3