Operation With Breakout Box (Connection Via Rs232) - InfraTec VarioCAM User Manual

7.8

Operation with Breakout Box (Connection via RS232)*

The use of the Breakout Box extends the options of connection of the VarioCAM
PAL/NTSC-FBAS and S Video as well as the digital RS232 interface are accessible via the Breakout Box.
Please follow the instructions as provided for making the desired connection.
1. At first, connect the thermographic camera and Breakout Box. For this purpose use the included 14-
pine system cable which is to be connected to the 14-pin (left) LEMO socket at the rear of the
thermographic system.
2. Then connect the Breakout Box to the COM interface of the host PC.
3. Now the included power supply unit is connected to the Breakout Box.
4. Only now you can press the
Connection Breakout Box – Option 1
Fig. 25 Breakout Box (S-Video, camera connection, power supply)
Fig. 26 Breakout Box (Trigger; RS232, BNC)
20
User Manual for the Thermographic System VarioCAM
C button at the rear of the camera to start the thermographic system.
© InfraTec GmbH 2013
®
hr. The analog outputs
Fig. 24 Trigger Cable Breakout-Box –
option 1
S-Video
Connection for system cable to the
®
VarioCAM hr
Power supply, 12 V DC supply voltage
Trigger T1, T2 (configurable)
Serial interface (RS232)
BNC video connection (PAL/NTSC-FBAS)
® high resolution
7. Starting up
User Manual