Stop Mode And Data Storage - InfraTec VarioCAM User Manual

User Manual for the Thermographic System VarioCAM
8. Operation
8.2.5

Stop Mode and Data Storage

The S button switches directly from the live and focus modes to the stop mode.
The stop mode freezes further image input, the image content (except date, time and info box) will not be
updated further. Using
Fig. 44 Stop mode
As in the live mode, the temperature level of the displayed scale of the thermal image can be set by
joystick movements ,
By pressing the C button for a longer time (CL), the selection of colour palettes will circulate and can be
chosen from.
In order to save thermal images with the VarioCAM
card slot. Otherwise
(see Fig. 45).
Fig. 45 Message if SD card
is missing
Upon starting the system or with each card change, the status of the SD card will be displayed for a few
seconds:
Fig. 48 Status SD card
User Manual
C or Enter changes from the stop mode into the live mode.
 and the temperature range by ,
an error message
Fig. 46
© InfraTec GmbH 2013
® high resolution
Stop mode

in the stop mode.
®
hr, an SD card must have been inserted into the
will be displayed
Message if SD card
in the slot is write-
protected
if any saving is
Fig. 47 Symbol for write-
protected SD card
attempted
31