Advertisement
How to Use
Your Dual Range
12 Blender
with Rotary Switch
(Jsterizcr
o
d u a l * r a r \ f l » • p u l a a •• r w t l e JQ
DDCZIDDDDDD
_ • •
WJIH
i t ^ . i — r -
The 12 processing speeds of the Dual Range "Pulse-Matic" blender are controlled
by the nine pushbuttons and the rotary switch marked LO/HI. The ON button Is used
for continuous operation. The PULSE button Is used for "Cycle Operation". The
remaining six buttons are the different speed selections. The rotary switch deter-
mines the speed range. When the switch is in the HI position, it controls the speeds
marked above the buttons. In the LO position it controls the speeds marked below
the buttons. The first button on the left is the OFF button.
FOR CONTROLLED CYCLE OPERATION
Rest hand on container, press proper speed button. Move rotary switch to proper
speed range. Press Pulse button and hold in for about 2 seconds. Release button
and allow blades to coast to a stop. Repeat for number of cycles as specified in
recipe. When processing is complete, press OFF button.
FOR CONTINUOUS OPERATION
Rest hand on container, press speed button. Move rotary switch to proper speed
range and press ON button. When processing is finished, press OFF button firmly.
How to Use
Your Dual Range
14 Blender
with Rotary Switch
• DDDDaDDa
Tsa-
w.>ui.MH^iuim.».."g-
d^
The 14 processing speeds of the Dual Range Blender are controlled by the nine
pushbuttons and the rotary switch marked LO/HI. The OFF*PULSE button Is used
for "Cycle Operation". The ON button Is used for "Continuous Operation". The
remaining seven buttons are the different speed selections. The rotary switch
determines the speed range. The switch in the HI position controls the speeds
marked above the buttons. The switch in the LO position controls the speeds
marked bektw the buttons.
FOR CONTROLLED CYCLE OPERATION
Rest hand on container, select and press proper speed button. Move rotary switch
to proper speed range. Press OFF*PULSE button and hold In for about 2 seconds.
Release button and allow blades to coast to a stop. Repeat for number of cycles as
specified in recipe. Release of the OFF*PULSE button tums the blender off.
FOR CONTINUOUS OPERATION
Rest hand on container, press speed button. Move rotary switch to proper speed
range and press ON button. When processing Is finished, press and release
OFF'PULSE button.
Advertisement
