Advertisement
Assembling
Your Blender
CAUTION: Follow these important steps to assemble, tighten, and mount blender container
qutekly and correctly. INJURY MAY RESULT IF MOVING BLADES ARE ACCIDENTALLY
EXPOSED.
ASSEMBLY OF CONTAINER
1. Turn container up-
side down so the small
opening is at the top.
2. Place sealing ring
on container opening.
3. Turn the agitator
blades upside down
and place in mouth of
container.
4. Thread container
bottom to container.
Engage threads prop-
erly. Screw on firmly.
TIGHTENING THE CONTAINER
Left
Containsr
Lug
Right Stop
Motor Base
and Ring
Tum
1. To tighten contain-
er bottom, put assem-
bled
container
se-
curely
into
motor
base ring with handle
and lug in front of tfie
right stop.
2. Using
container
handle, turn contain-
er to the left as far as
possible. This Insures
that
the
container
bottom Is tightened
properly.
Remove
container from motor
base and mount.
Do not attempt to place the container on, or
remove from the nrator base while tfie motor
is running.
ALWAYS HOLD CONTAINER WITH
ONE HAND WHILE PROCESSING.
MOUNTING
THE CONTAINER
Lett stop
Container
Lug
Right stop
Motor Base
and Ring
1. To operate blend-
er, place assembled
container
In
motor
base ring with con-
tainer lug against flat
side of right motor
base stop. If contairv-
er lug does not rest
against flat side of
right
stop,
remove
container
assembly
and place against flat
side of left stop. Seat
container firmly and
operata
2. To remove
con-
tainer, lift straight up. (If
It is not easily removed,
rock gently and lift up.
Do not twist.) If con-
tainer bottom cannot be
loosened by hand, place
assembled container
Into motor base ring
with handle in front of
left side stop. Using
handle, tum container
to right until container
bottom loosens.
"MINI-BLEND" CONTAINERS
"Mini-Blend" Containers (8-oz. [250mL] or 30-oz.
I885mLl sizes available as an accessory... not
normally Included with your blender). For proper
eissembly and tightening instructions, see above
directions. The "Mini-Blend" Containers alkiw for
the processing and storing of foods In the same
container.
DO NOT USE OTHER TYPES OF JARS FOR
PROCESSING FOODS. Ordinary Jars may break
or unscrew during processing. Do not wash any
parts. Including container. In an automatic dish-
washer. DO fslOT fill "MInl-Blend" Container
above MAXIMUM FILL LINE to alk>w for expansion
yOf foods while processing. Overfilling may cause
^
the jar to break and could result in Injury.
ASSEMBLY
Advertisement
