Advertisement
Know Your
' LiaumFiEi=i-BL.Er<jc3ei=i
This blender Is designed for household use only.
COVER
The cover for your Osterlzer blender consists of two parts, the
plastic feeder cap (1) and the vinyl cover (2). The cover Is
self-sealing, and Is made of vinyl which is resistant to absorption
of odors {ind stains. The feeder cap is removable for use as a
measuring cap and provides an opening for the addition of other
Ingredients.
CONTAINER
The 5-cup (1.25 liter) container (3) for the blender is graduated
for easy measurement and is molded of heat and cold resistant
material. The convenient handle and pouring lip permit easy
removal of liquid mixtures while thicker mixtures are more easily
removed through the bottom opening.
PROCESSING ASSEMBLY
Consists of three parts: (4) a sealing ring of neoprene used as a
cushion between the container and the agitator; (5) agitator of
high-grade stainless steel; (6) a threaded container bottom.
MOTOR AND MOTOR BASE
The powerful multi-speed motor Is the heart of the appliance
and is designed just for this unit. It Is completely enclosed
within the housing (7). The motor uses a "free-floating" fea-
ture to reduce noise and wear. This allows the square post
which protrudes from the motor base to move slightly from
side to side. The powerful food processing motor can be over-
toaded. To avoid this possibility, closely follow the instructions
and tfie quantities specified in the recipes in this book.
77)e Illustration and photography
of blenders found In this book do
not necessarily depict the particu-
lar model blender that you have
purchased. These photographs
are merely a guide to Illustrate the
versatility ol your blertder.
CARE AND CLEANING OF YOUR OSTERIZER® BLENDER
Blender container parts are corrosion resistant, sanitary and easily cleaned. Before first
use and after every use, separate container parts (items 1-6) and clean thoroughly in
warm, soapy water, then rinse and dry well. DO NOT WASH ANY PARTS IN AN AUTO-
MATIC DISHWASHER. Periodically check all parts before re-assembly
If the processing blades are stuck or difficult to turn, DO NOT USE BLEND-
ER. Check by carefully turning the blades In a counterclockwise direction
(opposite edges are sharp). Blades should turn freely.
If the glass container is chipped or cracked, DO NOT USE BLENDER.
Further use could result in the container breaking during use.
Use only Oster recommended replacement parts available at an authorized service facil-
ity or the factory.
USE OF DAMAGED OR NON-RECOMMENDED PARTS COULD RESULT IN A SEVERE
PERSONAL INJURY AND/OR DAMAGE TO THE BLENDER. See page 4 for proper con-
tainer assembly and user Instructions.
NEVER IMMERSE THE MOTOR BASE IN WATER. The housing can be cleaned with a
damp cloth (unplug first).
The rTK>tor Is permanently lubricated and does not require any additional lubrication.
ANY SERVICING SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE FACILITY.
See list of authorized service stations included with this book.
Advertisement
