Adjusting The Exup Cables - Yamaha FZS1000(N) 2001 Service Manual

ADJUSTING THE EXUP CABLES

EAS00101
ADJUSTING THE EXUP CABLES
1. Remove:
S seat
S fuel tank
2. Remove:
S EXUP valve pulley cover 1
3. Check:
S EXUP operation
a. Disconnect the EXUP servomotor connector
b. Connect the battery to the EXUP servomotor
Battery positive lead ! black/yellow 2
Battery negative lead ! black/red 3
CAUTION:
To avoid damaging the servomotor, do not
leave the battery connected to it for more
than a few seconds.
c. Check that the EXUP valve operates properly.
d. Connect the EXUP servomotor connector.
3-26
1 .
connector and check if the servomotor oper-
ates properly.
CHK
ADJ