SHIFT SHAFT
EAS00328
CHECKING THE SHIFT SHAFT
1. Check:
S shift shaft 1
Bends/damage/wear ! Replace.
S shift shaft spring 3
Damage/wear ! Replace.
EAS00330
CHECKING THE STOPPER LEVER
1. Check:
S stopper lever 1
Bends/damage ! Replace.
Roller turns roughly ! Replace the stopper
lever.
EAS00331
INSTALLING THE SHIFT SHAFT
1. Install:
S shift shaft spring stopper 1
S stopper lever spring 2
S stopper lever 3
NOTE:
S Apply LOCTITE
shaft spring stopper.
S Hook the ends of the stopper lever spring onto
the stopper lever and the crankcase boss.
S Mesh the stopper lever with the shift drum seg-
ment assembly.
2. Install:
S shift shaft 1
S spacer
NOTE:
S Lubricate the oil seal lips with lithium soap
base grease.
S Install the end of the shift shaft spring onto the
shift shaft spring stopper 2 .
5-49
ENG
22 Nm (2.2 mSkg)
to the threads of the shift