Table of Contents
Advertisement
LUBRICATING THE SIDESTAND/ LUBRICATING THE REAR SUSPENSION
CHECKING AND LUBRICATING THE CABLES /
LUBRICATING THE LEVERS AND PEDALS /
3-50
EAS00170
CHECKING
AND
CABLES
The following procedure applies to all of the
cable sheaths and cables.
WARNING
Damaged cable sheaths may cause the
cable to corrode and interfere with its move-
ment. Replace damaged cable sheaths and
cables as soon as possible.
1. Check:
S cable sheath
Damage ! Replace.
2. Check:
S cable operation
Unsmooth operation ! Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
NOTE:
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubing device.
EAS00171
LUBRICATING THE LEVERS AND PEDALS
Lubricate the pivoting point and metal-to-metal
moving parts of the levers and pedals.
Recommended lubricant
lithium soap base grease
EAS00172
LUBRICATING THE SIDESTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
lithium soap base grease
EAS00174
LUBRICATING THE REAR SUSPENSION
Lubricate the pivoting point and metal-to-metal
moving parts of the rear suspension.
Recommended lubricant
lithium soap base grease
CHK
ADJ
LUBRICATING
THE
Advertisement
Chapters
Table of Contents
Troubleshooting
