Assembling The Starter Motor - Yamaha FZS1000(N) 2001 Service Manual

ELECTRIC STARTING SYSTEM
b. If any resistance is out of specification, re-
place the starter motor.
5. Measure:
S brush length a
Out of specification ! Replace the brushes
as a set.
6. Measure:
S brush spring force
Out of specification ! Replace the brush
springs as a set.
7. Check:
S gear teeth
Damage/wear ! Replace the gear.
EAS00772

ASSEMBLING THE STARTER MOTOR

1. Install:
S armature
S brush seat 1
NOTE:
Align the tab a on the brush seat with the slot b
in the starter motor rear cover.
8-25
ELEC
Brush length wear limit
4 mm
Brush spring force
7.65 X 10.01 N