5Th/Reverse Selector - With Reverse Brake; Interlock Assembly; Differential Assembly - Lotus Elise Service Notes

MANUAL GEARBOX
5th/Reverse Selector - with reverse brake
The 5th/reverse selector (1) is secured to the
selector shaft by a roll pin (2). The selector
incorporates the components for the reverse brake
operation. This comprises of a lock plate (3) a
retaining spring (4). The spring retains the lock plate
in position, with The two ends of the spring located
under two 'Taptite' screws (5) which are positioned
either side of the 5th/reverse selector.
Interlock Assembly
37M1292
37M1165
NOTE: A modified interlock assembly
/ \ having 2 springs has been introduced;
this assembly may be fitted as &
replacement to early gearboxes.
1. Withdraw shift shaft from gearshift holder and
arm guide.
2. Release lug on arm guide from slot in interlock.
3. Slide gearshift holder off ami guide.
Differential Assembly
37M1151
1. Remove bearings using tools 18G 2,18G 2/3
and 18G 1397; discard bearings.
1 2 OVERHAUL REVISED: 12/97