Lotus Service Notes
Section XA
7.
The distribution control cable runs from the upper selector lever to the bottom of the flap spindle on RHD
cars, and to the top of the flap spindle on LHD cars:
RHD cars: Access to the distribution flap lever is available from within the passenger footweli. With the
selector lever at defrost, the flap spindle should be turned fully clockwise when viewed from beneath, and
the cable hooked into the middle hole in the lever. Position the lever on the spindle and clamp the outer
cable to allow full flap movement to be obtained.
LHD cars: The cable connects to the top end of the flap spindle, with access improved by the removal of
the wiper mechanism. With the selector lever at defrost, the flap spindle should be turned fully clockwise
and the cable hooked into the hole nearest the spindle. Position the lever on the spindle and clamp the
outer cable to allow full flap movement to be obtained.
Page 15