Lotus Elise Service Notes page 445

Lotus Service Notes
Section XA
Equal arcs
Ideal adjustment of
control cable to
attain equal arcs
of flap lever travel
Flap lever
Control cable
PF.3 • HEATER MATRIX & BLOWER FAN UNIT
The heater matrix is sandwiched between two plastic mouldings and is clamped to the blower fan unit by
a rubber strap. The complete assembly is secured via thread inserts in the chassis front well by two screws
through a bracket on the front of the fan unit, and a single screw through the fan casing at the rear, accessible
after removing the outlet ducting. An additional screw secures the heater matrix inlet moulding via a bracket
on the top front edge.
Page 15