Overhaul; Selector Shafts - Lotus Elise Service Notes

B
37M1147
Slide 5th/reverse gear selector off 5th/reverse
selector shaft.
Slide 3rd/4th and 5th selector forks off
5th/reverse selector shaft.
3. 3rd/4th gear selector fork
4. 5th gear selector fork
5. 5th/reverse selector shaft
6. 1 st/2nd gear selector fork
7. 1st/2nd selector shaft
Selector Shaft Components 4.
1. Roll pin 5.
2. 5th/reverse gear selector
~ CAUTION: Two types of selector shaft
/ j \ assemblies have been fitted. Type A
selectors are manufactured from cast
steel whilst type B are manufactured from
aluminium bronze and are gold in colour.
Do not interchange selector forks or shafts
between type A and B assemblies.
1. Identify each selector fork and its fitted position
to the relevant selector shaft. Slide 1st/2nd
gear selector fork off 1st/2nd selector shaft.
2. Slide 1st/2nd selector shaft out of 5th gear
selector fork and 5th/reverse gear selector.
3. Using a suitable punch, remove roll pin
securing 5th/reverse gear selector; discard roll
pin.
OVERHAUL 1 1