Lotus Elise Service Notes page 169

ENGINE
110 1736
12M1770
33. Assemble cylinder liner retainer clamps 18G
1736 to cylinder head bolts. Position retainer
clamps on cylinder liners ensuring clamps do
not protrude over liner bores. Screw cylinder
head bolts into oil rail and tighten sufficiently to
retain clamps.
CAUTION: Ensure that bolts used are
l \ those originally fitted in that location.
A
Cylinder head - K16 VVC engines - remove
- CAUTION: If crankshaft is to be removed
/ j \ during overhaul it will be necessary to
check and record crankshaft end-float
prior to removing cylinder head.
1. Remove and discard camshaft timing belt.
A
CAUTION: Do not rotate crankshaft whilst
timing belt is removed and cylinder head
is fitted, pistons will contact the valves.
12-182
M124932A
2. Ensure that tool18G 1570 is fitted to cei'mshaft
gears.
3. Suitably identify each camshaft gear to its
respective camshaft and using tool 12-182 to
restrain camshaft gears against rotation,
remove bolt and plain washer securing each
camshaft gear.
4. Remove tool 18G 1570, remove camshaft
gears.
3 2 OVERHAUL