Lotus Elise Service Notes page 142

ENGINE
Flywheel not fitted with a reluctor ring
iacis7i
6. Fit flywheel locking tool 18G 1571.
7. Secure with 2 bolts.
Flywheel fitted with a reluctor ring
A
NOTE: VVC camshaft t i m i n g gear marks
are shown in the inset on the illustration.
3. Rotate crankshaft clockwise to align camshaft
gear timing marks - 90° BTDC.
~ CAUTION: Do not use camshaft gears,
/ ! \ gear retaining bolts or timing belt to rotate
crankshaft.
4. Fit camshaft gear locking tool 18G 1570.
1 8 G 1 6 7 4
M124937
8. Fit flywheel locking tool 18G 1674, tighten bolt.
~ CAUTION: Ensure tooth on tool 18G 1674
/ j \ engages with teeth on flywheel not the
reluctor ring
M124954
5. Check that timing mark on crankshaft pulley is
aligned with mark on timing belt lower cover.
5 OVERHAUL