Front Turn Indicator & Sidelamp Bulbs; Rear Lamp Cluster Bulbs; Reverse Lamps - Lotus Evora 2011 Owner's Handbook Manual

be unplugged. Note that touching the glass envelope by hand
is likely to lead to premature failure. If necessary, the envelope
should be cleaned using white spirit and a paper tissue.
After refitting, verify lamp operation and check that the
protective boot is correctly fitted onto the lamp body before
replacing the wheelarch liner access panel.
Front Turn Indicator & Sidelamp Bulbs
The front turn indicator lamps and sidelamps are provided by
light emitting diodes (LEDs) and are incorporated into the head-
lamp assemblies. These lamps are designed for long life and
are serviceable only by replacement of the complete headlamp
unit, which job should be entrusted to your Lotus dealer.
Rear Turn Indicator, Stop and Tail Lamps
Each outboard tail lamp comprises a complete ring of red col-
oured light emitting diodes (LEDs) which function as follows:
Sidelamps:
Brakelamps:
Turn Indicator:
alternating with off, or low intensity, dependent on whether the
sidelamps are lit. Note that when the brakelamps and turn
lamps are activated together, the flashing turn function will take
precedence over that brakelamp (the opposite side brakelamp
and the CHMSL will operate normally).
The lamps are serviceable only by replacement of the complete
unit, which job should be entrusted to your Lotus dealer.

Reverse Lamps

A secondary lamp is mounted inboard of each rear lamp unit,
to provide a pair of reversing lamps. These are sealed units
containing a ring of white LEDs, which are serviceable only by
replacement of the complete lamp. This process should be
entrusted to your Lotus dealer.
160
oh_evoraS_a_USA.indd 160
The complete ring lights up at low intensity.
The complete ring lights up at high intensity.
The complete ring flashes at high intensity,
28/04/2011 11:53:33