ENGINE
t O M ^ ^
M124952
4. Rotate crankshaft clockwise to align camshaft
gear timing marks - 90" BTDC.
~
CAUTION: Do not use camshaft gears,
/ j \ gear retaining bolts or timing belt to rotate
crankshaft.
5. Fit camshaft gear locking tool 18G 1570.
M124949
6. Check that timing mark on crankshaft pulley is
aligned with mark on timing belt lower cover.
1 8 G 1 6 7 4
M124937
7. Fit flywheel locking tool 18G 1674, tighten bolt.
»
CAUTION: Ensure tooth on tool 18G 1674
/ ! \
engages with teeth on flywheel not the
reluctor ring.
11 OVERHAUL