Installing The Filter; Replacing The Filter Upon Display Request; Replacing The Filter Without Display Request - Jura IMPRESSA E25 Instructions For Use Manual

Table of Contents

Advertisement

5.1, Installing the filter

Your IMPRESSA E10/20/25 is switched off.
Fold up the cartridge holder in the water tank. Now insert the
filter cartridge in the water tank, applying gentle pressure
(Fig. 1).
Close the cartridge holder until it engages audibly.
Fill the water tank with cold tap water and reinstall it in the
coffee machine (Fig.4).
Press draw-off key
(5) until the set water hardness is dis-
played.
Press draw-off key
(5) until the only symbol lighting up is .
Press the ON/OFF
(6) key to confirm.
lights up,
lights up
Place a sufficiently large receptacle under the steam / hot water
draw-off tap.
Open the steam / hot water draw-off tap (Fig.13).
Draw off water until symbol
Close the steam / hot water draw-off tap.
flashes, heating
lights up
Press the maintenance key
flashes
lights up

5.2 Replacing the filter upon display request

After drawing off 50 liters of water the filter cartridge will
be used up. A message requesting you to replace the filter
will appear on the display
lights up.
(4).
lights up,
lights up
Press the maintenance key
lights up,
lights up
Remove the water tank (11) from the machine and empty it.
Fold up the cartridge holder. Install the filter cartridge in the
water tank (11), applying a gentle pressure (Fig. 4).
Fold down the cartridge holder again until it engages audibly.
Fill the water tank (11) with cold, fresh tap water and reinstall it.
Place a sufficiently large jug (approx. 1 litre) under the replace-
able hot water nozzle (14) and open the steam/hot water tap (Fig.
13).
lights up,
flashes
lights up,
lights up
Close the steam / hot water draw-off tap (12).
flashes, heating
lights up
Press the maintenance key
lights up
5.3 Changing the filter without display request
Press the maintenance key
or
or
appears.
Turn the water quantity switch (1) until
lights up appears.
Press the maintenance key
The program «Change filter» is now active. Now proceed as
described in Chapter 5.2 as from
lights up,
lights up.
(4).
(4).
(4) until
(4).
E
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impressa e20Impressa e10

Table of Contents