Installing The Rear Fender - KTM 505 SX Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Installing the rear fender

10.10
–
Raise the rear of the air filter box lid
on the carburetor connection boot to kink it at that location.
Info
This prevents the carburetor connection boot from disconnecting from the carbu-
retor.
–
Raise fender
301821-10
–
Raise the rear of the air filter box lid
on the carburetor connection boot to kink it at that location.
Info
This prevents the carburetor connection boot from disconnecting from the carbu-
retor.
–
Position front fender
–
Fix the air filter box lid in the fender.
301821-11
Info
If the air filter box lid is not correctly mounted, dust and dirt can penetrate into
the engine and cause damage.
. At the same time, use your other hand to press
2
at the rear and remove it.
3
. At the same time, use your other hand to press
1
.
2
74