ELECTRICAL SYSTEM
Changing the fuses of individual power consumers
13.5
–
The main fuse
–
Remove protection covers
–
Remove the faulty main fuse.
Info
You can recognize a blown fuse by its broken filament
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
–
Insert the new fuse.
Fuse (58011109120)
Tip
Replacement fuse
it is available when needed.
301833-10
–
Replace the protection covers.
–
Remove the front cover. (
–
Switch off all power consumers and switch off the engine.
is located in the starter relay
1
.
3
should always be present in the starter relay to make sure
4
p. 72)
in front of the battery.
2
.
A
133