TUNING THE ENGINE
Adjusting play in throttle cable
15.3
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire steer-
ing range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable. (
–
Check the throttle cable routing.
–
Move the handlebar to the straight-ahead position.
–
Loosen the nut
Guideline
Play in throttle cable
–
Tighten nut
301795-10
and use the screw
to adjust the play in the throttle cable
1
2
.
1
p. 143)
3... 5 mm (0.12... 0.2 in)
143
.
A