Adjusting Basic Position Of Clutch Lever; Removing The Engine Guard - KTM 505 SX Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Adjusting basic position of clutch lever

10.36

Removing the engine guard

10.37
–
Position the cover with the membrane. Mount and tighten screws.
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw .
1
Info
Turn the adjusting screw counterclockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw clockwise to decrease the distance between the clutch
lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
301813-10
Do not make any adjustments while riding!
–
Remove screws
301823-10
and . Remove the engine guard.
1 2
103