Filling Coolant/Bleeding The Cooling System - KTM 505 SX Owner's Manual

COOLING SYSTEM

Filling coolant/bleeding the cooling system

14.6
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
–
Remove radiator cap
–
Mount screw
Guideline
Screw, water pump cover
–
Mount screw
Guideline
Remaining screws, chassis
301838-10
x
–
Remove the front trim. (
–
Remove the radiator spoiler. (
. Completely drain the coolant.
3
with a new seal and tighten.
1
with a new seal and tighten.
2
p. 75)
p. 69)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
140