Removing The Oil Filter - KTM 505 SX Owner's Manual

MAINTENANCE WORK ON THE ENGINE

Removing the oil filter

x
16.4
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under lukewarm water immediately.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plug with the magnet.
–
Clean the sealing area on the engine.
–
Fit oil drain plug
Guideline
Oil drain plug with magnet
301841-10
–
Clean the oil screen.
–
Place a suitable container under the engine.
with the seal ring.
1
with the seal ring and tighten it.
1
M12x1.5
x ( p. 153)
152
20 Nm
(14.8 lbf ft)