CONTROLS
Kill switch/emergency OFF switch with rip cord
5.4
Electric starter button
5.5
The kill switch/emergency OFF switch
Kill switch
is used to switch off the engine under normal circumstances.
4
The emergency OFF switch shuts the engine off if the rider falls off the vehicle.
A rip cord is attached to clip
carabiner
.
3
Possible states
Clip is pulled off – The ignition circuit is interrupted, a running engine stops and a
•
non-running engine will not start.
Clip is mounted – The ignition circuit is closed and the engine can be started.
•
Clip mounted and kill switch pressed – The ignition circuit is interrupted, a running
•
301777-10
engine stops and a non-running engine will not start.
Electric starter button
Possible states
•
Electric starter button
•
Electric starter button
301793-10
is mounted on the left in front of the fuel tank.
1
. It can be attached to the clothing of the rider by means of
2
is fitted on the left side of the handlebar.
1
in basic position
is pressed – In this position, the electric starter is actuated.
21