Installing The Oil Filter - KTM 505 SX Owner's Manual

MAINTENANCE WORK ON THE ENGINE
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Installing the oil filter

x
16.6
–
Place a suitable container under the engine.
–
Loosen screw plug
–
Remove plug
–
Drain the remaining engine oil.
–
Thoroughly clean the parts and sealing area.
–
Mount and tighten screw plug
Guideline
Plug, oil screen
301842-10
–
Fill oil filter
301844-10
by striking it lightly with a hammer a few times.
1
with oil screen and the O-rings.
1 2
with oil screen
1
M32x1.5
with engine oil and place it in the oil filter container.
1
and the O-rings.
2
30 Nm Lubricated with
(22.1 lbf ft) engine oil
154