Changing The Ignition Curve; Checking The Basic Setting Of The Shift Lever - KTM 505 SX Owner's Manual

TUNING THE ENGINE

Changing the ignition curve

15.8
–
Remove the front trim. (
Changing the ignition curve from Performance to Soft.
–
Disconnect plug-in connector
Soft – The plug-in connector is disconnected for better driveability. (
Changing the ignition curve from Soft to Performance.
–
Connect the plug-in connector
Performance – The plug-in connector is connected to achieve better performance. (
–
Install the front trim. (

Checking the basic setting of the shift lever

15.9
A 0 0 0 A
p. 75)
. (Figure 301829-10
1
. (Figure 301829-10
1
p. 77)
–
Sit on the vehicle in the riding position and determine the distance
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
» If the distance does not meet specifications:
–
400692-10
p. 147)
p. 147)
p. 147)
Adjust the basic position of the shift lever.
p. 147)
between the
A
10... 20 mm (0.39... 0.79 in)
x ( p. 149)
148