Changing The Fuses Of Individual Power Consumers - KTM 525 XC ATV EU Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Changing the fuses of individual power consumers

9.54
–
The main fuse
–
Remove protection covers
–
Remove the faulty main fuse.
Info
You can recognize a blown fuse by its broken filament
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
–
Insert the new fuse.
Fuse (58011109120)
Tip
Replacement fuse
it is available when needed.
100091-10
–
Replace the protection covers.
–
Remove the front cover. (
–
Switch off all power consumers and switch off the engine.
is located in the starter relay

.

should always be present in the starter relay to make sure

p. 140)
in front of the battery.

.

133