Obd Drive Mode - Mazda 6 Workshop Manual

2. Connect WDS or equivalent to the vehicle DLC-2
16-pin connector located on the left side of the
steering column.
3. Retrieve DTC using WDS or equivalent.
Pending Trouble Code Access Procedure
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect WDS or equivalent to the vehicle DLC-2
16-pin connector located on the left side of the
steering column.
3. Retrieve pending trouble code using WDS or
equivalent.
Freeze Frame PID Data Access Procedure
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect WDS or equivalent to the vehicle DLC-2
16-pin connector located on the left side of the
steering column.
3. Retrieve FREEZE FRAME PID DATA using WDS
or equivalent.
PID/DATA Monitor and Record Procedure
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect WDS or equivalent to the vehicle DLC-2
16-pin connector located on the left side of the
steering column.
3. Access and monitor PIDs using WDS or
equivalent.
End Of Sie

OBD DRIVE MODE

• Performing the Drive Mode inspects the OBD system for proper operation and must be performed to ensure
that no additional DTCs are present.
ON-BOARD DIAGNOSTIC
DLC-2
DLC-2
DLC-2
DLC-2
A6E40702001
F2
A6E40702001
A6E40702001
A6E40702001
B6E407018881107
F2–39