Multi-Function Switch Quick Table - Genius 722 User Manual

Multi-function switch quick function table
Function
To turn on
anti-hijack
stand-by
To turn off
anti-hijack
stand-by
At anti-hijack at
first trigger stage
turn off
At anti-hijack at
full stage trigger
turn Off
At normal time
Valet mode
On/Off
Manual
disarm
Then
open car
door
Manual
arm
Genius Car Alarm
Multi-functio
n switch
Press 1 time
switch LED
and parking
light one time
Press 1 time
switch again
Hold switch 3
sec siren
chips
Hold switch 3
sec siren
chips
Hold switch 3
sec siren
chips
Press 3 times ,
siren chips
Press 3 times,
siren chips
www.alarmasgenius.com
Process
System enters anti-carjack
stand-by. If triggered by
door, Anti-carjack first
stage is initiated
LED and parking flash
three time or If ignition is
turned off, anti-carjack
standby mode was cleared
If ignition turn-off is
followed by siren chirps.
Anti-carjack mode was
cleared
If ignition turn-off is
followed by siren chirps.
Anti-carjack mode is
cleared, but still in
arm/lock mode
If ignition turn-off is
followed by siren chirps
Valet mode On/OFF
Ignition off siren chips =
Manual disarm system.
If ignition turn-off is
followed by siren chirps.
Manual disarm is done.
If ignition turn-off is
followed by siren chirps..
Then 20 sec later, system
enters arm mode..
9