Auto Arm - Genius 722 User Manual

beeps and LCD display icon (Refer picture No.23) to notify
" nullify".
B) If "heavy impact" is weaker than "light impact", the system
does not recognize this and will nullify this process. Excert
"heavy impact" again.
7. If sensor sensitivity needs re-adjustment, follow the above
procedure from step 2 to 5.

Auto arm & (without or with lock) upon closing
Last door
1. The auto arm feature allows the system to arm automatically
without user intervention.
2. Press and hold button 2
button 4
the LCD remote will show it. Refer picture No.15
3. When auto arm mode is ON Close all the doors first. Then turn
ignition to OFF. Open the door to leave out and close it. Siren will
sound as confirmation the system has entered 10 sec countdown
before auto arming is activated.(auto arm with door-lock or
without locking refer Alarm function RF program 4 ).
Purpose: Without using hand to control remote, the system enters arm
mode itself.
4. At below situation the auto arm function will disable.
A) If the car any door is opened while the ignition is form ON
to OFF .
B) During into 10 sec countdown the door close twice.
Purpose: Remind user that system enters auto arm and door has been
lock.
Genius Car Alarm
to select On/Off Auto arm. If select it in ON mode
www.alarmasgenius.com
for level shift ,then Press and release
14