Manual Disarm; Use Pin Secure Code Procedure - Genius 722 User Manual

button 2
release of button
unlock/disarm mode. The alert LED flashes until turn on ignition
by key.


Manual disarm

1 When remote had lost or broken use manual disarm function to
cancel arm mode.
2 Need to be confirmed that system is settled in which of following
situations in order to set up this function. The system have A B
kind of way to manual arm or disarm system ( depend alarm RF
programmed 5 to controlled by secure PIN code or not ).
A) For system uncontrolled by secure PIN code While
system at arm mode If user want to manual to "disarm"
system . Turn the ignition key to ON position and need
open the door. Push "3' time the multi function switch.
Then turn off ignition the siren will chirp to indicate
become disarm.
B) For system controlled by secure PIN code Refer use PIN
code procedure.


Use PIN secure code procedure

1. The system had to programmed to secure PIN code mode before if
want to using PIN code procedure to manually disarm and to
deactivate the anti-hijack in finally stage active mode. If didn't
programmed to PIN code mode that can't using PIN code to
disarm system.
2. The system default PIN code digit number is
st
1 digit code
(X) time
Genius Car Alarm
once to terminate alarm triggering The 2
2
nd
2 digit code
(Y) time
www.alarmasgenius.com
makes the main system enter
nd
press and
20