Alarm Function Rf Program Table Explanation - Genius 722 User Manual



Alarm Function RF Program Table Explanation

st.
1 Door lock/unlock output current time
1. Lock - 0,8sec; Unlock - 0,8sec (for electric system)
2. Lock - 3,6sec; Unlock - 3,6sec (for pneumatic system)
3. Lock - 0,8sec; Unlock - 2 pulse of 0,8sec (for 2 stage unlock cars)
4. Lock - 30sec; Unlock - 0,8sec ("comfort" output for Mercedes cars)
nd
2 Door lock/unlock upon ignition ON/OFF
1. All doors must be closed and turn ignition ON. If brake pedal is
depressed, system will auto door-lock. It will immediately unlock when
the ignition is turned OFF.
2. Car door is locked upon ignition ON. It will immediately unlock when
the ignition is OFF.
3. Car door is not locked upon ignition ON. It will immediately unlock
when the ignition is OFF.
4. Car door is not lock / unlock upon ignition ON/ OFF.
rd
3 Delay door switch time
1. Detect car's dome light wire Smart Bypass Which system into arm the
door zoom detect effective will after the trigger disappear. If the
triggered connection after 60 sec. the siren will chips 4 times and LCD
show door open.
2. Detects door pin switch instantly When system enters arm ,system
detects door zone immediately .In other word ; after arm if door is
opened, the system will auto by pass. Siren chips and LCD displays
door open.
3. Detects door pin switch after 30 sec
arm ,system detects door zone after 30 second . In other word; after
arm if door is opened, the system will auto by pass. Siren chips and
LCD displays door open
4. Detects door pin switch after 45 sec
arm ,system detects door zone after 45 second . But after 45 sec, if
Genius Car Alarm
www.alarmasgenius.com
When system enters
When system enters
34