How To Use Pin Code To Disarm The System; How To Change Pin Code For Security Needs - Genius 722 User Manual



How to use PIN code to disarm the system

3-1) Turn the ignition to ON position and it is necessary to open car
door.
3-2) Press and release the multi function switch (X) times (X is "1"as
the factory default or the new 1
3-3) Turn the ignition OFF. Then turn ON the ignition again.
3-4) Press and release the multi function switch (Y) times (Y is "1"as
the factory default or the new 2
3-5) Turn the ignition OFF. After the system verifies PIN codes, it
disarms itself.
3. The PIN code can be re-assigned by the car owner. Refer to the
procedure to enter PIN setting mode and re-assign a new PIN code
if desired.
 How to change PIN code for security need
1. First ignition had to turn at OFF position.
2. Press and release multi function switch"4"times then turn the
ignition ON which is followed by 4 siren chirps.
3. Press multi function switch once then siren a chirp to confirm into
set new PIN 1
digit code refer below.
3-1) To assign PIN code digit number at "1" time. Press and release
1
3-2) To assign PIN code digit number at "2" time. Press and release
2
3-3) To assign PIN code digit number at "3" time. Press and release
3 button remote unit. The siren 3 chirp to confirm.
3-4) To assign PIN code digit number at "4" time. Press and release
4 button remote unit. The siren 4 chirp to confirm.
Genius Car Alarm
st
digit code (X) time. To using remote to set first
button remote unit. The siren 1 chirp to confirm.
button remote unit. The siren 2 chirp to confirm.
www.alarmasgenius.com
st
digit if reassigned)
nd
digit if reassigned)
21