without opening the car door. The system will jump out of anti
carjack standby mode.
2.
To trigger anti-carjack mode
2-1) Triggering of anti carjack first stage mode During anti-carjack
standby mode. If the door is opened and close, the system enter
anti-carjack trigger first stage mode. The parking light flashes for
30 sec to show first stage mode is initiated but the siren did not
chirps the engine is running normally at this stage. If first stage
mode didn't interrupted on time, the system will enters second
stage anti-carjack mode.
2-2) Enter second stage of anti-carjack mode Follow first stage
system will auto into anti-carjack second stage mode the parking
light flashes with siren chirps for 30 sec when this stage initiates.
Engine will keep on running. If this stage is not interrupted, full
anti carjack function will be triggered.
2-3) To disable first and second stage anti-carjack mode Press and
release remote button 2
switch 3 sec. the siren chirps then turn ignition OFF). The system
will jump out of anti carjack mode.
3.
Enter full stage of anti-carjack mode Follow second stage
system will auto into anti-carjack full triggering stage mode.
system have A B kind of state.(refer alarm RF programmed 11 ).
A) Anti-carjack safe mode The parking light flashes with
siren alert which time if brake pedal is depressed the engine
runs chokes for 45 sec then shuts down the engine. If in this
time the ignition still at ON position the parking light and
siren continuous flashes and alert.
Note Select safe mode the main unit orange/violet wire needs
connect to pedal brake switch
B) Anti-carjack auto mode The parking light flashes with
Genius Car Alarm
Refer to picture No.12
www.alarmasgenius.com
or (press and hold multi function
17
Need help?
Do you have a question about the 722 and is the answer not in the manual?
Questions and answers