Setting Up The Serial Interface Using Tera Term - Philips Respironics V60 Service Manual

Chapter 6
Reports and Software Downloads
6-6
6.1.2

Setting Up the Serial Interface Using Tera Term

Follow these steps to set up the Tera Terminal program, which enables the
ventilator to communicate to a service PC.
1. From your web browser go to: http://ttssh2.sourceforge.jp/, then click
the download page link.
2. Click on teraterm-x.xx.exe.
NOTE: If your PC does not allow the download, follow the instructions for "click
this link."
3. Click Run on the File Download screen (Figure 6-9).
Figure 6-9: File Download Screen
4. A progress screen is displayed during the file download (Figure 6-10).
V60 Ventilator Service Manual
Figure 6-10: File Download
1049766 Rev A